Skip to main content

Crestron device

Followings are the installation steps of setting up Bookings ONE onto the Crestron device.

Supported device model​

Preparation​

  • Prepare a computer for advanced setting

Installation Steps​

  1. When the panel is activated, you need to press and hold the screen with 5 fingers for around 15-30 seconds to enter the Setting page.
  2. If you are first time to enter the Setting page, you need to setup username and password.
  3. After you setup username, password and enter the Setting page, input the IP address of the panel to the browser of the computer.
  4. Input username and password of the panel to login.
  5. Go to Settings.
  6. Change the timezone to your regional timezone.
  7. Roll down and click the Application.
  8. Change the Application Mode to EMS.

  1. Input Bookings ONE player domain to the Url, enter the server address + /player, e.g.
  • https://company.bookings.one/player
  • http://192.168.0.100/player
  1. Click Save Changes button and reboot the panel.

After Installation​

After Bookings ONE player installation on the device is completed, please refer to the Section Connect to server to continue the setup of the connection of the player to Bookings ONE on the devices.